Unify OpenScape Desk Phone IP 55G - Making Anonymous Calls; Deactivating; Activating

OpenScape Voice functions 185
Making anonymous calls
Your administrator decides whether or not your caller ID (name and phone num-
ber) is displayed on a called party's station. Anonymous calling is when your
data is not transmitted. The settings configured can be deactivated, however, for
specific calls.
Deactivating
If your administrator permanently activated anonymous calling for your phone,
you can deactivate this setting as follows:
^ Lift the handset.
j Enter the code (see the table of codes  Page 201) to transmit the caller infor-
mation.
Z You hear a confirmation tone/announcement.
Activating
If your administrator activated caller ID transmission for your phone, you can de-
activate this setting as follows:
^ Lift the handset.
j Enter the code (see the table of codes  Page 201) to suppress the caller ID.
Z You hear a confirmation tone/announcement.
Caller ID transfer is suppressed. "Unknown/Anonymous" appears on the called
party's display instead of the
caller ID.
• If your caller ID is transmitted: your caller ID is displayed.
• If your caller ID is suppressed: "unknown" is displayed.