130 Making calls with multiple lines
The key of a secondary line illuminates – it is busy. You want to connect to the
call.
Press the illuminated line key. A conference is established. You are connected
to the parties on the secondary line. The key continues to illuminate and the con
-
ference is shown on the display.
You can now:
• Put the secondary line on hold
• Leave the conference on the secondary line
• Make a consultation call
• Accept a second call
• Alternate between a new call party and a conference on the secondary line.
• Include a call party from a consultation or a second call in the conference.
If there is already a conference on the secondary line you are connected
to this conference. The conference is shown on the display.
To Next Page
Loading...
