Universal Robots UR5e - Page 330

Open... Allows you to load a Program and/or Installation.
Opening a Program
1. In the Program and Installation Manager, tap Open... and select
Program.
2. On the Load Program screen, select an existing program and tap
Open.
3. In the File Path, verify that the desired program name is displayed.
Opening an Installation.
1. In the Program and Installation Manager, tap Open... and select
Installation.
2. On the Load Robot Installation screen, select an existing installation
and tap Open.
3. In the Safety Configuration box, select Apply and restart to prompt
robot reboot.
4. Select Set Installation to set installation for the current Program.
5. In the File Path, verify that the desired installation name is displayed.
User Manual 330 UR5e
Copyright © 2009–2023 by UniversalRobotsA/S. All rights reserved.