Installing Internal Courier 2-3
Step One: Configuring with Jumpers
Your Courier V.Everything comes configured for Plug and Play, which
allows Windows 95 to automatically configure itself to work with the
Courier V.Everything.
Figure 2.2 Jumpers
Windows 95 Users
Users of Windows 95 should not need to change jumper settings, because
Windows 95 automatically detects and configures your Courier.
If you install your Courier, start Windows 95, and Windows 95 does not
automatically detect your Courier, you may need to change the jumper
settings. For information about setting jumpers, see Chapter 7,
Configuring Your Courier With DIP Switches and Jumpers.
Jumpers
To Next Page
Loading...
