US Robotics Courier V.Everything - If You Are Using Windows NT 4.0; What You Need; Configuring Your Courier; Installing the Latest Courier Software

6-2 Courier V.Everything Getting Started
Guide
If You Are Using Windows NT 4.0
What You Need
You need Windows NT with Remote Access Service (RAS) installed to
configure your Courier V.Everything for Windows NT.
Configuring Your Courier
To obtain and install the Courier V.Everything INF file for Windows NT,
follow the same steps as Windows 95 users.
See section “Configuring Your Courier” in Chapter 4.
Installing the Latest Courier Software
After you obtain the latest Courier V.Everything INF file, copy it to the
C:\WINNT\INF subdirectory.
For more information about Windows NT, see Windows NT
documentation or visit the U.S. Robotics Totalservice web site at
http://totalservice.usr.com.