Windows 95 4-5
Installing the Latest Courier Software
See your Courier V.Everything Command Reference Manual for information
about upgrading your Courier’s software.
Accessing Your Internet Service Provider
This section explains how to set up your Courier V.Everything to access
the Internet using Windows 95 Dial-Up Networking. You can also use
Dial-Up Networking to access Internet Service Providers (ISPs) or remote
LANs. To access your ISP or a remote LAN, you must do the following:
Step One: Determine if Dial-Up Networking is installed.
Step Two: Install Dial-Up TCP/IP support (if necessary)
Step Three: Set up a connection to your ISP
Step Four: Customize TCP/IP settings (if necessary)
Step One: Determine if Dial-Up Networking is Installed
1 Click Start | Settings | Control Panel.
2 On the Control Panel, double-click on Network to
display the Network Window.
To Next Page
Loading...
