US Robotics Courier V.Everything - How X2 Works; Controlling X2

Using x2 10-3
How x2 Works
For information about how x2 works, visit the x2 web site at
http://www.usr.com/x2
Controlling x2
Use the following S58 settings to control x2:
To do this Use this command
Disable x2 ATS58.0=1
Force A-law mode ATS58.2=1
Table 12.1 Controlling x2
Note: A-law is required in all countries but the United States, Canada,
Japan, Taiwan, and Hong Kong. If you are using your Courier
V.Everything in one of these countries, do not force A-law mode.