Using x2 10-1
Chapter 10
Using x2
Use this chapter to perform the following actions:
• Determine if your Courier V.Everything has x2 enabled
• Enable x2
• Use the new features
Enhanced x2 Features
Your Courier V.Everything with x2™ has new result codes and the
following new features.
To do this Use this command
Detemine if x2 is enabled in your modem ATI7
Disable or enable x2 ATS58
Limit the upper speed limit of an x2
connection
AT&N
Limit the lower speed limit of an x2
connection
AT&U
Configure the High Speed (HS) LED ATS69
Note: New x2 features should be transparent to most users. If you are an
advanced user, see the sections ”Controlling x2” and “Controlling Link
Speeds with &N and &U” later in this chapter for detailed information
regarding these features.
To Next Page