Utax 261ci - Optional Function

11-6
Appendix > Optional Equipment
Optional Function
You can use the optional applications installed on this machine.
Overview of the Applications
The applications listed below are installed on this machine. You can use these applications for a limited period on a trial
basis.
UG-33 (ThinPrint) (This application can only be activated in Europe.)
This application allows print data to be printed directly without a print driver.
Starting Application Use
Use the procedure below to start using an application.
1
Display the screen.
2
Start using an application.
1 Select the desired application and press [Activate].
NOTE
Restrictions such as the number of times the application can be used during the trial period differ depending on the
application.
NOTE
If user login administration is disabled, the user authentication screen appears. Enter your login user name and
password and then press [Login]. For this, you need to login with administrator privileges. Refer to Adding a User on
page 9-40 for the default login user name and password.
System Menu/Counter.
System Menu
10:10
System/Network
5/5
Adjustment/Maintenance
Date/Timer/Energy Saver
System
Optional Function
10:10
2/2
System Menu/Counter.
< Back
1
GB0511_01
GB0054_04
2
3
Use [ ] or [ ] to scroll up and down.
System - Optional Function
10:10System Menu/Counter.
CARD AUTHENTICA...
Activate
1/1
End
GB0557_00
1
2
Displays details for individual applications.