2-33
Preparation before Use > Embedded Web Server RX
Changing Device Information
Change the device information of the machine.
1
Display the screen.
1
Access
Embedded Web Server RX
by referring to Accessing Embedded Web Server RX on
page 2-31.
2 From the Device Settings menu, select System.
2
Specify the host name.
Enter the device information, and then click Submit.
After changing the setting, restart the network or turn the machine OFF and then ON.
To restart the network interface card, click Reset in the Management Settings menu,
and then click Restart Network in “Restart”.
To Next Page
Loading...
Need help?
General
