Utax 261ci - Color Registration Procedure

9-30
Setup, Registration, and User Management > System Menu
Color Registration Procedure
Normal registration and detailed settings are available for Color Registration. Color drift can be largely corrected through
normal registration. However, if it is not resolved or to perform more detailed settings, use the detailed settings.
Normal Registration
1
Display the screen.
2
Print the chart.
A chart is printed. On the chart, for each of M (magenta), C (cyan) and Y (yellow), 3 chart
types are printed on one sheet: H-L (left), V (vertical), H-R (right).
NOTE
To perform color registration, verify that either Letter or A4 paper is loaded into a cassette.
IMPORTANT
Before performing color registration, be sure to perform Calibration (see page 9-29). If color drift remains,
perform color registration. By performing color registration without performing Calibration, the color drift will
be resolved once, however, it may cause the serious color drift later.
1
System Menu/Counter.
System Menu
10:10
System/Network
5/5
Adjustment/Maintenance
Date/Timer/Energy Saver
2
Correcting Black Line
10:10System Menu/Counter.
Display Brightness
< Back
2/4
Off
Adjustment/Maintenance
Color Registration
Tone Curve Adjustment
3
3
GB0629_01
Use [ ] or [ ] to scroll up and down.
GB0054_04
Normal
10:10System Menu/Counter.
Detail
< Back
1/1
Adjustment/Maintenance - Color Registration
4
GB0641_00
GB0642_00
Color Registration - Normal
10:10System Menu/Counter.
Registration
Print Chart
1/1
End