Utax 261ci - Changing Security Settings

2-32
Preparation before Use > Embedded Web Server RX
Changing Security Settings
This section explains how to change the security settings.
1
Display the screen.
Access Embedded Web Server RX by referring to Accessing Embedded Web Server RX on
page 2-31.
2
Configure the Security Settings.
From the Security Settings menu, select the setting you want to configure. The configurable
settings are Device Security, Send Security, Network Security, and Certificates.
NOTE
The configurable settings within Device Security, Send Security, and Network Security
can also be configured from the machine's System Menu.
For details, see System Menu on page 9-2.
For details on settings related to certificates, refer to the Embedded Web Server RX User
Guide.