2-17
Preparation before Use > Installing Software
3
Install using Express Install.
You can also select Use host name for port name and set to use the host name of the
standard TCP/IP port. (A USB connection cannot be used.)
4
Finish the installation.
When Your software is ready to use appears, you can use the software. To print a test page,
click the Print a test page checkbox and select the machine.
Click Finish to exit the wizard.
To install Status Monitor, it is necessary to install Microsoft .NET Framework 4.0 beforehand.
The machine cannot be detected unless it is on. If the computer fails to detect the machine,
verify that it is connected to the computer via a network or USB cable and that it is turned on
and click (Reload).
If the Windows security window appears, click Install this driver software anyway.
1
2
3
4
Packages include the following software:
• Driver Package
Printing System Driver, Fonts, Status Monitor
• Scan Package
TWAIN Driver
To Next Page
Loading...
Need help?
General
