2-30
Preparation before Use > Embedded Web Server RX
Embedded Web Server RX
If the machine is connected to the network, you can configure various settings using Embedded Web Server RX.
This section explains how to access Embedded Web Server RX, and how to change security settings and the host
name.
For details on Embedded Web Server RX, refer to the Embedded Web Server RX User Guide.
Settings that the administrator and general users can configure in Embedded Web Server RX are as follows.
*1 This is displayed when the optional SSD is installed.
*2 Only on products with the fax function installed.
*3 The logged in user may not be able to configure some settings, depending on the permissions of the user.
*4 This is displayed when the optional Card Authentication Kit is installed.
To fully access the features of the Embedded Web Server RX pages, enter the User Name and Password and click
[Login]. Entering the predefined administrator password allows the user to access all pages, including Document Box,
Address Book, and Settings on the navigation menu. The factory default setting for the default user with administrator
privileges is shown below.
* Upper case and lower case letters are distinguished (case sensitive).
Setting Description
Administ-
rator
General
User
Device
Information
The machine's structure can be checked.
Configuration, Counter, About Embedded Web Server RX
āā
Job Status Displays all device information, including print and scan jobs, storing jobs,
scheduled jobs, and job log history.
Printing Jobs Status, Printing Job Log, Sending Job Status,
Scheduled Jobs, Sending Job Log, Storing Job Status,
Storing Job Log
āā
Document Box Add or delete document boxes, or delete documents within a document box.
Custom Box*
1
, Sub Address Box*
2
, Polling Box*
2
, Job Box Settings
āā*
3
Address Book Create, edit, or delete addresses and address groups.
Machine Address Book, External Address Book Settings, One Touch Key
āā*
3
Device Settings Configure the advanced settings of the machine.
Paper/Feed/Output, Original Settings, Energy Saver/Timer, Date/Time,
System
ā -
Function Settings Configure the advanced function settings.
Common/Job Defaults, Copy, Printer, E-mail, Scan to Folder, FAX*
2
,
Send and Forward, Forward Rules*
1
, Operation Panel
ā -
Network Settings Configure the network advanced settings.
General, TCP/IP, Protocol
ā -
Security Settings Configure the security advanced settings.
Device Security, Send Security, Network Security, Certificates
ā -
Management
Settings
Configure the advanced management settings.
Job Accounting, Authentication, ID Card*
4
, Notification/Report,
History Settings, SNMP, Reset
ā -