2-29
Preparation before Use > Machine Setup Wizard
Machine Setup Wizard
The Machine Setup Wizard is launched when the equipment is turned on for the first time after being installed.
Following the instructions on the screen to configure the following settings:
For details about settings, refer to the help information displayed on the touch panel. To make
changes after this initial configuration, refer to Date/Timer/Energy Saver on page 9-27 and System/
Network on page 9-19.
Date/Time settings Time Zone
Summer Time
Date
Time
Network settings Obtain IP Address
IP Address
Subnet Mask
Default Gateway
Machine setup
10:10
This wizard will help you set up
your machine.
To continue, press [Next >].
< Back Next >
1. Date/Time
2. Network
System Menu/Counter.
To Next Page
Loading...
