3-7
Common Operations > Loading Paper
2
Load paper.
?
Insert the paper along the paper width guides into the tray until it stops.
3
Specifying Paper Size and Media Type for the Multi Purpose Tray.
Refer to Quick Setup Wizard on page 3-29.
Keep the side that was closest the package seal facing up.
Curled paper must be uncurled before use.
Straighten the top edge if it is curled.
When loading paper into the multi purpose tray, check that there is no paper left over
in the tray from a previous job before loading the paper. If there is just a small amount
of paper left over in the multi purpose tray and you want to add more, first remove the
left-over paper from the tray and include it with the new paper before loading the
paper back into the tray.
To Next Page
Loading...
