EasyManuals Logo

Utax cd 1120 Instruction Handbook

Utax cd 1120
161 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #107 background imageLoading...
Page #107 background image
System Settings
ADVANCED OPERATION GUIDE 3-25
Display Contrast Adjustment
Use to adjust the Display Contrast if required.
1
Display the Machine default screen, refer to Access the Machine Default
Screen, on page 3-15.
2
Press S or T to select Display
Contrast and press [Enter].
3
Press < or > to adjust the contrast.
Move left to darken the contrast,
or right to lightens the contrast
and press [Enter].
4
Press [Reset]. The Copier Basic screen returns.
Administrator Management Code Change
You can change the 4-digit Management Code for the machine
administrator.
IMPORTANT: If you change the Management Code, ensure you note it
down. If you forget the code, contact your Service Representative.
NOTE: The factory default management code varies for each model:
16 ppm model = 1600, 20 ppm model = 2000, and 25 ppm model = 2500.
1
Press S or T to select PIN #
Change or MGMT Code.
NOTE: If using a metric machine, this option displays as MGMT Code
entry.
2
Use the numeric keys to enter the
new Administrator Management
Code and press [Enter].
3
Press [Reset]. The Copier Basic screen returns.
On:
08:48:
Display Contrast :
Date/Time
Key Sound On/Off
Machine Default:
Display Contrast Adjustment:
*
08:48:
:
PIN # Change
Display Contrast
Date/Time
Machine Default:
Management Code Change:
1600
# keys

Table of Contents

Other manuals for Utax cd 1120

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Utax cd 1120 and is the answer not in the manual?

Utax cd 1120 Specifications

General IconGeneral
BrandUtax
Modelcd 1120
CategoryAll in One Printer
LanguageEnglish

Related product manuals