Appendix
ADVANCED OPERATION GUIDE Appendix-11
Specifications
NOTE: Specifications are subject to change without notice.
Machine
Copying System Indirect Electrostatic System
Original Types
Accommodated
Sheets, Books, and 3-dimensional objects (maximum original
size: A3/11 × 17")
Copy Sizes
- Cassette A3, B4, A4, A4R, B5, B5R, A5R, Folio, 11 × 17" (Ledger),
8
1/2 ×14" (Legal), 11×81/2", 8 1/2 × 11" (Letter), 5 1/2 ×81/2"
(Statement), 8
1/2 × 13" (Oficio II)
- Multi-Bypass Tray A3 to A6R, Postcard, Folio, 11 × 17" (Ledger) to 5
1/2 ×81/2"
(Statement)
- Width that Cannot be
Copied
0.5 to 5.5 mm
Paper For further information refer to Paper, on page Appendix-2.
Paper Feed Source Capacity
- Cassette 300 sheets (80 g/m²), 100 sheets (90 to 105 g/m²)
- Multi-Bypass Tray 50 sheets (80 g/m²)
(25 sheets for A3, B4, Folio, 11 × 17" (Ledger), 8
1/2 × 14"
(Legal), 8
1/2 × 13" (Oficio II)
Output Tray Capacity 250 sheets (80 g/m²)
Warm-up Time Less than 20 seconds
Time for recovery from Low Power mode: 10 seconds
Time for recovery from Sleep Mode: 20 seconds
(At room temperature: around 73.4 °F (23 °C), humidity:
around 50 %)
Memory
- For Copier 64 MB
-For Printer 64MB
- Additional Memory For copier: 16 MB, 32 MB, 64 MB, and 128 MB
For printer: 32 MB, 64 MB, 128 MB, and 256 MB
Operating Environment
- Temperature 10 to 32.5 °C
- Relative Humidity 15 to 80 %
- Altitude 2,000 m maximum
- Illumination 1,500 lux maximum
Power Source 120 V AC, 60 Hz, 9.0 A
220 to 240 V AC, 50/60 Hz, 5.0 A
To Next Page
Loading...
Need help?
General
