Appendix
Appendix-6 ADVANCED OPERATION GUIDE
Packaging: Paper should be packed in a sturdy carton to protect it from
damage during transport. Quality paper obtained from a reputable supplier
is usually correctly packaged.
Special treatment: It is recommended not to use paper with the following
treatment even if the paper satisfies the basic specifications. To use this
type of paper, perform a test prior to purchasing large amounts.
- Glazed paper
- Watermarked paper
- Paper with uneven surface
- Paper with perforations
Special Paper
The following types of special paper can be used:
- Transparency
- Preprinted paper
- Label
- Bond paper
- Recycled paper
- Thin paper (45 to 64 g/m²)
- Letterhead
- Color paper
- Prepunched paper
- Envelope
-Postcard
- Thick paper (90 to 160 g/m²)
- High-quality paper
Use paper that is sold specifically for use with copiers or printers (heat-
fusing type). When using transparencies, labels, thin paper, envelopes,
postcards, or thick paper, feed the paper from the Multi-Bypass Tray.
To Next Page
Loading...
Need help?
General
