Utax cd 1120

System Settings
ADVANCED OPERATION GUIDE 3-17
4
Press [Reset]. The Copier Basic screen returns.
Paper Type (cassettes 1 to 4)
Use to set the paper types for cassettes 1 to 4.
Paper types that can be set: Plain, Preprinted, Bond, Recycled, Rough,
Letterhead, Color, Prepunched, High quality and Custom 1 to 8.
NOTE: For the 16 ppm model, cassettes 2 to 4 are included in the
optional paper feeder. For the 20 and 25 ppm model, cassettes 3 and 4
are included in the optional Paper Feeder. This setting is displayed only if
the optional Paper Feeder is installed.
1
Display the Machine default screen, refer to Access the Machine Default
Screen, on page 3-15.
2
A Paper Type option is available
for each cassette. Press S or T
to select the Paper Type option
required and press [Enter].
3
Press S or T to select the paper
type and press [Enter].
4
Press [Reset]. The Copier Basic screen returns.
Multi-Bypass Tray Confirmation Display
Use to select to display the Bypass Paper Size screen when pressing the
Paper Select key to select the Multi-Bypass Tray.
1
Display the Machine default screen, refer to Access the Machine Default
Screen, on page 3-15.
2
Press S or T to select Check
Bypass and press [Enter].
3
Press S or T to select On or Off
and press [Enter].
4
Press [Reset]. The Copier Basic screen returns.
Machine Default:
Paper Type(1st) Plain:
Paper Size(3rd) Auto I
:
Paper Size(4th) Auto I:
Paper Type (1st cassette):
Plain
Preprinted
*
Bond
Machine Default:
Check Bypass Off:
Paper Type(3rd) Plain:
Paper Type(4th) Plain:
Check Bypass Sizing:
Off
On
*