Utax cd 1120 Instruction Handbook

Copy Functions
1-18 ADVANCED OPERATION GUIDE
Program Function
Up to eight combinations of copy modes and functions displayed on the
operation panel can be registered as a single program.
Registering a Program
1
Select the copy options to be registered (for example 5 copies, Sort,
Margin) and press [Program].
2
Press S or T to select Register
program and press [Enter].
3
Press S or T to select the
program number required (1 to 8)
and press [Enter].
The program is registered.
NOTE: You can also select the program number using a numeric key.
Using a Program
1
Press [Program].
2
Press S or T to select the
program number required and
press [Enter].
NOTE: You can also select the program number using a numeric key.
3
Position the originals and press [Start].
Copies are produced using the settings registered in the program.
Register program.
Program:
Program #7
Program #8
Program #3
Register program:
Program #1
Program #2
Program #3
Program:
Program #1
Program #2

Utax cd 1120 Specifications

General

Brand	Utax
Model	cd 1120
Category	All in One Printer
Language	English