Printer Settings
2-16 ADVANCED OPERATION GUIDE
Subnet Mask Setting
Continue from the previous Step 6 to register the Subnet Mask address.
NOTE: If you are not sure of the appropriate Subnet Mask address,
contact your Network Administrator.
1
Display the TCP/IP Setting screen.
2
Press S or T to select Subnet
Mask and press [Enter].
3
Enter the Subnet Mask address
using the same procedure used
for the IP Address in steps 8 - 9 of
IP Address Setting.
Press [Enter] when the entire address has been entered.
Default Gateway
Continue from the previous Step 3 to register the Default Gateway.
NOTE: If you are not sure of the appropriate Default Gateway address,
contact your Network Administrator.
1
Access the TCP/IP Setting screen.
2
Press S or T to select Gateway
and press [Enter].
3
Enter the Gateway address using
the same procedure used for the
IP Address in steps 8 - 9 of IP
Address Setting.
Press [Enter] when the entire address has been entered.
4
When you have entered all the network settings, press [Reset].
The Printer Basic screen displays.
DHCP
IP Address
TCP/IP Setting
Subnet Mask
Subnet Mask
0 0..00.
IP Address
Subnet Mask
TCP/IP Setting
Gateway
Gateway
0 0..00.
To Next Page
Loading...
Need help?
General
