System Settings
ADVANCED OPERATION GUIDE 3-13
Black Streaking Reduction Processing
If black streaks (streaks that are not contained in the original image)
appear on copies from the optional Document Processor, you can make
black streaking less noticeable. Black Streaking Reduction processing
reduces the reproducibility of fine characters, therefore it is recommended
to use the factory default setting.
To use the Black Streaking Reduction processing, first select Weak. If
black streaking is not reduced, select Strong
1
Display the Copy Default screen, refer to Access the Copy Default Screen,
on page 3-3.
2
Press S or T to select Corr.
Black line and press [Enter].
3
Press S or T to select None,
Weak or Strong and press
[Enter].
4
Press [Reset]. The Copier Basic screen returns.
Corr. Black Line
Copy Limit
BorderEraseWidth
Copy Default:
1/4":
999:Set
None:
Correct. Fine black line:
None
Weak
*
Strong
To Next Page
Loading...
Need help?
General
