System Settings
ADVANCED OPERATION GUIDE 3-23
Default Operation Mode
Select the default screen to be displayed when the power is switched on.
The Copy or Fax screen can be displayed.
NOTE: This item is displayed only if the optional Fax kit is installed.
1
Display the Machine default screen, refer to Access the Machine Default
Screen, on page 3-15.
2
Press S or T to select Main
mode and press [Enter].
3
Press S or T to select Copy
mode or Fax mode and press
[Enter].
4
Press [Reset]. The Copier Basic screen returns.
Key Sound
Use to enable a beep sound each time a key on the Operation Panel is
pressed.
1
Display the Machine default screen, refer to Access the Machine Default
Screen, on page 3-15.
2
Press S or T to select Key sound
On/Off and press [Enter].
3
Press S or T to select Off or On
and press [Enter].
4
Press [Reset]. The Copier Basic screen returns.
Main Mode Copy:
Machine Default:
Fax Output Destn Top Tray:
Copy Otput Destn Top Tray:
Select the Main Mode:
Copy Mode
Fax Mode
*
Key Sound On/Off On:
Machine Default:
:
Low Power Time :
Sleep Mode Time 30Min.
15Min.
Key Sound On/Off:
Off
On
*
To Next Page
Loading...
