Utax cd 1120 Instruction Handbook

Printer Settings
2-4 ADVANCED OPERATION GUIDE
Quick Copy/Proof-and-Hold
Quick Copy and Proof-and-hold are selected from the printer driver.
When a Quick Copy job is received, the machine stores it in memory until
the user enters the number of copies required and prints the job.
When a Proof-and-hold job is received, the machine prints one set and
then stores the job in memory. The user can check the proof, change the
number of copies if required and print the remaining sets.
NOTE: For information about the printer driver options, refer to the KX
Printer Driver Operation Guide.
1
Access e-MPS, refer to Access e-MPS, on page 2-3.
2
Press S or T to select Quick
Copy and press [Enter].
3
Press S or T to select the user
name specified by the printer
driver and press [Enter].
4
Press S or T to select the job
name specified by the printer
driver and press [Enter].
5
Use the numeric keys to enter the
number of copies and press
[Enter].
Printing commences.
Deleting Quick Copy/Proof-and-Hold
Quick copy/proof-and-hold jobs stored in memory are deleted
automatically when the power is switched off. Use the following
instructions to delete a job manually.
1
Select the job to delete, refer to Quick Copy/Proof-and-Hold, on page 2-4.
2
Press S or T to select Delete and
press [Enter].
Back
Quick Copy
e-MPS
Private/Stored
Select User Name
tom
Select JOB
List
Copies
Select User Name
Delete
001:
Copies
Select User Name
Delete
001:

Utax cd 1120 Specifications

General

Brand	Utax
Model	cd 1120
Category	All in One Printer
Language	English