vacon • 41 Parameter description
3
P4.4 ACCELERATION TIME 2
P4.5 D
ECELERATION TIME 2
P4.6 R
AMP 2 S SHAPE
Ramp 2 is available only in Automatic mode, and is activated through digital signal defined in
P5.11. Automatic activation based on output frequency is also available.
P4.7 T
HRESHOLD ACCELERATION TIME 2
P4.8 T
HRESHOLD DECELERATION TIME 2
If P4.7 is not 0, acceleration time 2 is activated when output frequency is higher than the value.
If P4.8 is not 0, deceleration time 2 is activated when output frequency is higher than the value.
P4.9 Q
UICK STOP DECELERATION TIME
Specific ramp time for quick stop. To see description of P2.5 for details about the function.
To Next Page
Loading...
