107
OIL DISCHARGE MONITOIRNG & CONTROL SYSTEM
FAULT FINDING FORM
Fault Finding Aid Checklist Oilcon
®
Mark 6M
Serial number MCU: …………………
(the serial number can be found on the backside, 6 digits)
Serial number EPU: …………………
(Stamped on the Ex ia type plate at the left side of the EPU, 6 digits)
At the DATA ENTRY PARAMETERS printout you will find the K-Factor parameters:
Skid K-Factor: …………………p/l
Cell K-Factor: …………………
The following steps have to be followed in order for VAF Instruments to determine if the ODM
system is having a malfunction. If during the complete procedure an alarm is triggered, push the
Alarm rest button and write down the Alarm.
To Next Page
Loading...