Vaisala CL31 - User Commands; Figure 21 Open and Closed Port

Chapter 5 ________________________________________________________________ Operation
VAISALA_______________________________________________________________________ 57
0406-066
Figure 21 Open and Closed Port
User Commands
User commands are described in Table 8 on page 58. User commands are
accessible after opening the line with the open command. No password is
needed.
The exact format of commands does not have to be remembered, as the
command line interpreter provides interactive support. At each menu
level, pressing ENTER provides an output of the available menu.
Inserting a letter followed by ENTER outputs all commands starting with
that letter. Inserting two letters followed by ENTER outputs all
commands that start with those two letters, and so on, until only the
desired command is left. This command is then executed by pressing the
ENTER key.
In addition to the user menu and the user level command set, there is a
second in-depth maintenance and service level menu and command set,
which is intended for more profound system changes and diagnostics.
These advanced level commands are presented in Table 9 on page 60.
The password for this level is "advanced". The commands on this level
should only be used acco
rding to th
e instructions in this manual.