EasyManua.ls Logo

Vaisala CL31 - Page 83

Vaisala CL31
142 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 5 ________________________________________________________________ Operation
VAISALA_______________________________________________________________________ 81
The transmission time and size is the following:
total 75 characters
=> 0.31 s at 2400 bps (10 bit char.)
=> 18.0 Kbytes/h, 432 Kbytes/d, 12.7 Mbytes/mo. at 4 msg/min,
uncompressed
Message interpretation:
LINES 1 and 2 are identical to that of Message number 1.
LINE 3
Example: 3 055 5 170 0 /// 0 ///
Note that the string begins with 2 spaces.
where
3 = The first number of line: detection status as follows:
0 ... 8 Cloud amount of the first layer in oktas.
9 Vertical visibility.
-1 Data missing or the ceilometer is in standby mode.
99 Not enough data (after start-up).
055 The second number of line: Height of the 1st cloud layer
(5500 ft or 550 m depending on feet or meter selection).
5 The third number of line: Cloud amount of the 2nd layer
in oktas.
170 The fourth number of line: Height of the 2nd cloud layer
(17000 ft or 1700 m depending on feet or meter
selection).
0 The fifth number of line: Cloud amount of the 3rd layer
in oktas.
/// The sixth number of line: Height of the 3rd cloud layer.
0 The seventh number of line: Cloud amount of the 4th
layer in oktas.
/// The eighth number of line: Height of the 4th cloud layer.
The reporting resolution is 100 ft or 10 m depending on feet or meter
selection. If the cloud amount is zero, the corresponding layer height is
///.

Table of Contents

Related product manuals