Chapter 3 ________________________________________________________________ Operation
VAISALA _______________________________________________________________________ 13
3. Check that the needed peripherals are properly connected.
4. Switch the power supply on.
5. Start the DigiCORA sounding program from Start – Programs –
DigiCORA – DigiCORA, or click the DigiCORA icon on the
desktop.
DigiCORA starts and the DigiCORA main window shown in Figure 1
appears on your screen.
Refer to the appropriate user's guides for details on powering up the
system.
0408-007
Figure 1 DigiCORA Main Window
Setting Station Position
If the system is equipped with an MWG or an MRG card, the station
position data is fetched from the card by default. However, you can also
set the default values manually in the Station Position dialog, presented
in Figure 2 on page 14.
If you choose to enter the default station position values manually, you
will automatically be asked to enter the default station position values
when you start the first sounding.
To Next Page
Loading...
