USER'S GUIDE____________________________________________________________________
18 __________________________________________________________________ M010117EN-H
7. Radiosonde reconditioning (optional):
If the radiosonde is connected to the workstation via cable, it is
now possible to recondition the radiosonde. Radiosonde
reconditioning is optional, see DigiCORA User’s Guide for details.
The reconditioning lasts for 3 minutes.
If you do not recondition the radiosonde, click Next to proceed.
The sounding system is initialized and a request to perform a
ground check appears.
8. Performing ground check (optional):
Performing ground check is optional. See Ground Check Set GC25
User’s Guide and DigiCORA User’s Guide for information.
If you do not perform the ground check, click Next to proceed.
9. Disconnect the radiosonde cable and power up the radiosonde.
To Next Page
Loading...
Need help?
General
