EasyManua.ls Logo

Vaisala WXT532 - Chapter 4 Installation; Maritime Installations

Vaisala WXT532
235 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 4 _______________________________________________________________ Installation
VAISALA_______________________________________________________________________ 37
CHAPTER 4
INSTALLATION
This chapter provides instructions on installing the transmitter.
Maritime Installations
In maritime installations according to IEC 60945, the WXT530 series
belongs to the installation category C, which means that it is exposed to
weather.
When making maritime installations, pay attention to the following:
- The product is magnetically inert. The compass-safe distance is
less than 20 cm. Do not install the transmitter near a standard or a
steering magnetic compass. The transmitter must be installed in
open space to avoid disturbance in measurements.
- Do not place the transmitter directly in front of a radar.
- Do not install the transmitter next to a powerful RF-transmitter
antenna.
NOTE
Do not store the transmitter outdoors. Make sure you switch on the
transmitter right after installation.

Table of Contents

Related product manuals