Vaisala WXT532 - Mounting on Vertical Pole Mast; Figure 18 Removing Screw Cover; Figure 19 North Arrow

Chapter 4 _______________________________________________________________ Installation
VAISALA_______________________________________________________________________ 43
Mounting on Vertical Pole Mast
To mount a transmitter on a vertical pole mast:
1. Remove the screw cover and insert the transmitter to the pole mast.
Figure 18 Removing Screw Cover
2. Align the transmitter so that the arrow points to north.
1509-084
Figure 19 North Arrow
3. Tighten the fixing screw and replace the screw cover.