Valtra F Series

3.8 Swinging drawbar
3.8.1 Adjusting the swinging drawbar length
The oset of the swinging drawbar (A) can be
adjusted as required.
GUID-412DCCC3-539E-43B9-92A3-E5E620966F78-low.png [Low]
Fig. 132
Procedure
1. To adjust the drawbar for length, remove the
locking pins (A) and the pins (B).
2. Adjust the drawbar length as required.
3. Refit the locking pins (A) and the pins (B).
WARNING:
The drawbar must be correctly
set for the implement being
towed.
GUID-AFCDEF02-9601-44A7-AD74-D3575355DFD0-low.png [Low]
Fig. 133
[V]
GUID-073ABBA4-8DAD-46B9-A5E8-DBD61D38B5C2 [V1]
3. Operation
118 F Series
39940211 (555124)