Valtra F Series

4.4 Lower Links - Ends adjustment
Lower link ends can be adjusted according to the implements. To obtain dierent positions proceed as
follows:
Procedure
1. Remove lock pin (A).
2. Remove pin (B).
3. Adjust position of bracket (C).
4. Re-install pin (B) and lock pin (A) once the
desired setting is obtained.
GUID-FF58091A-B08B-42C2-B882-D45AB15F0BF8-low.png [Low]
Fig. 55
GUID-277EDE16-8E72-43A0-BB1A-666147D31C20-low.png [Low]
Fig. 56
GUID-E8FF6651-E40F-44AB-A625-0F2E5B61CC52 [V1]
4. Maintenance
170 F Series
39940211 (555124)