Valtra F Series User Manual

IMPORTANT:
To prevent damage to the transmission, do not change the speed while the machine moves.
Before you use the PowerShuttle lever:
• Put the range lever and the gear lever in the neutral position.
• Start the engine.
• Select the range and the gear speed.
• Set the engine speed.
PowerShuttle lever (mechanical version)
Press and hold the clutch pedal. Then move the
PowerShuttle lever (A) from neutral to forward or
reverse gear position to select the travel direction.
GUID-CF09683C-8456-4108-B80B-82A08562D8CB-low.png [Low]
Fig. 4
PowerShuttle lever (hydrostatic version)
Set the speed range to the slowest speed. Then
lift and move the PowerShuttle lever (A) to the
forward or rearward position. When the
PowerShuttle lever (A) is in the neutral position,
the indicator light “N” on the display illuminates.
GUID-AA4EC169-7950-4D41-9924-3AB273112763-low.png [Low]
Fig. 5
3.1.2.2 Gear Lever
Operate the gear speed selection through the gear lever, found on the right side of the driver's position.
Before you move the gear lever, push the clutch pedal, select the gear and gradually release the clutch
pedal to gradually apply the load. You can also set the gear speed when the tractor moves.
GUID-AF79F6AB-3862-4D7E-A0E3-ADD9471C1C3E [V1]
3. Operation
58 F Series
39940211 (555124)

Valtra F Series Specifications

General

Brand	Valtra
Model	F Series
Category	Tractor
Language	English