Adjust the operator's seat position (model with pneumatic)
Operate the lever (1) to release the seat. Move the
seat forward or rearward to the correct position.
Adjust the seat position to the correct distance
from the pedals and steering wheel. Release the
lever (1) and make sure that the seat locks in
position.
Operate the button (2) to adjust the seat height.
Push the button to lift the seat. Pull the button to
lower the seat.
GUID-74E243F6-5EE5-4471-A425-3EA5FF671F1B-high.jpg [High]
Fig. 150
Safety belt
NOTE: It is mandatory to put on the safety belt. Obey your local road rules.
Machine without a cab
WARNING: Risk of injury.
Risk of injury or death.
Always put on the safety belt when you work with the roll bar in vertical position and
locked. The machine can overturn.
NOTE: Do not put on the safety belt when the roll bar is down.
Machine with a cab
WARNING: Risk of injury.
Risk of injury or death.
Always put on the safety belt. The machine can overturn.
GUID-E271E539-37A8-4A9F-9E06-BC0D02F364F9-high.jpg [High]
Fig. 151
3. Operation
F Series 129
39940211 (555124)