Lamp for engine oil pressure
IMPORTANT:
Do not let the engine operate when the oil pressure is not sucient.
If lamp (1) comes on while the engine operates, immediately stop the engine.
Examine the engine oil level, and if necessary, fill the engine with oil to the correct level.
Speak to your dealer if the malfunction continues.
Low charge level - Generator warning lamp
The lamp (2) comes on when the ignition key is in the ignition position.
The lamp goes o when the engine starts.
If the generator output voltage is low, the lamp comes on to show there is a malfunction. If this occurs,
stop the engine and examine the belt tension.
Speak to your dealer if the malfunction continues.
Coolant temperature indicator
If the coolant temperature gets too hot, the warning lamp (3) comes on.
Immediately stop the engine, and:
• Examine the coolant level in the radiator.
• Make sure that the radiator is not clogged.
• Examine the tension of the fan belt.
If the problem continues, speak to your dealer.
Warning lamp for a clogged air filter
If the air filter is clogged, the lamp (A) comes on.
Clean, or change the filter element.
GUID-D9C7D4E8-69C6-4C57-A4D8-0914E96C0061-high.jpg [High]
Fig. 164
Stop the engine
IMPORTANT:
Move all connected equipment to the ground before you stop the engine.
3. Operation
F Series 135
39940211 (555124)
To Next Page
Loading...
