Valtra F Series - 5 Specifications

Dierential locking
Type Mechanical, with shaft
Engaged Hydraulic
Rear axle
Model Narrow / Standard
Type Planetary gear
Ratio 6:1
Flange space 972 mm / 1242 mm
Wheel fastener circle diameter 203 mm
Wheel disc centre diameter 152 mm
Number of wheel fasteners 8 (each side)
Wheel fasteners type M18 x 1.5
Maximum load capacity on the rear axle 3100 kg
NOTE: The Local regulations can limit the values specified in the Tire load index chart.
PTO
Standard PTO speed 540 1/min 540e 1/min 1000 1/min
Engine speed 1938 1/min 1648 1/min 1962 1/min
PTO end diameter 1"3/8 1"3/8 1"3/8
Number of splines 6 6 21
Direction of rotating Clockwise Clockwise Clockwise
Gear ratio: Engine speed / PTO
rpm
3.6 3 1,9
Ground speed PTO
Standard PTO speed 540 1/min 540e 1/min 1000 1/min
Number of PTO turns for 1 turn
of a wheel (24.85 mph)
9.077 10.670 16.605
Front axle
Model Narrow / Standard
Type 4WD
Maximum steering angle 55° / 52°
Rake 6° / 7°
Dierential type Limited slip
Flange gap 990 mm / 1326 mm
4WD engaged Electro-hydraulic
Dierential locking Automatic
4
5. Specifications
F Series 211
39940211 (555124)