Procedure
1. Put the PowerShuttle lever (1) in neutral
position.
GUID-0ACAF039-B248-4206-A9DE-41F9B7EC7B10-high.jpg [High]
Fig. 98 With cab
2. Put the gear lever (2) in neutral position.
GUID-C982148B-95B5-4200-9C37-13AA1F9F913A-high.jpg [High]
Fig. 99 Without cab
3. Put the speed range lever (3) in neutral position.
If it is necessary to move from the operator's seat when you stop the machine, obey these
instructions:
3. Operation
F Series 101
39940211 (555124)
To Next Page
Loading...
Need help?
General
