Vatech Smart Plus PHT-35LHS - Setting Folder Exclusions with Anti-Virus Software

8. Setting up PC’s Environment Variables
96 Smart Plus (PHT-35LHS) Installation Manual
8.5 Setting Folder Exclusions with Anti-virus Software
 Set the virus scan exception for the files and folders
related to this equipment.
 DO NOT run the memory-resident background
programs unrelated to the equipment.
 It is recommended to run the virus scan only when the
equipment is idle.
 Turn the firewall off.
 Always use the blank USB drive whenever possible.
Some files used by the Smart Plus are incorrectly recognized as viruses/trojans by
anti-virus software. If you are using anti-virus software on your PC, you must exclude
those files from all scans performed by the anti-virus software.
For Smart Plus, the following folders, and files inside for relevant software should be
excluded from the virus scan.
Path Software
C:\Program Files\Vatech Ez3D-i/EzDent-i
C:\VCaptureSW Console Software
 Suppose the anti-virus program from McAfee is running
in the background.
 The procedure to set folder exclusions is similar for most
anti-virus programs.
1. Open the McAfee anti-virus program and select the VirusScan.
Right-click the On-Access Scan menu option and left-click the Properties tab.
Select the All Processes  Detection  Exclusions menu option and choose the Add
menu button.
Navigate to the folders or the files you want to designate an exclusion path for, and
select the checkbox to Also Exclude Subfolders.
Click OK when completed and exit McAfee for the path exclusion to be completed.