Vatech Smart Plus PHT-35LHS - Installing the Warning Lamp and Door Interlock Switch; Installing the Emergency Stop Switch

2. Choosing an Installation Site
Smart Plus (PHT-35LHS) Installation Manual 21
English
2.7 Installing the Warning Lamp and Door Interlock Switch
Refer to Appendix A for a complete installation guide.
 This system can be equipped with a warning lamp and the Door Interlock Switch
which are activated when the X-ray is energized.
 The warning lamp and Door Interlock Switch are not included with the equipment.
 The warning lamp and the Door Interlock Switch must be installed by a qualified
technician.
2.8 Installing the Emergency Stop Switch
Refer to Appendix B for a complete installation guide.
 Install the Emergency Stop Switch along with the main power cable in the central
distribution panel.
 Install this switch so that it is within easy reach of the operator but cannot be
accidentally pressed.
 The switch must be a fool-proof model.