Vatech Smart Plus PHT-35LHS - Setting up the User-Specific Information

9. Installing Software
114 Smart Plus (PHT-35LHS) Installation Manual
9.5 Setting up the User-specific Information
See the corresponding section for set-up instructions, based
on the viewer program (EasyDent or EzDent-i (SDK))
installed on the PC.
• EasyDent: Refer to Section 9.5.1 when the EasyDent is
installed.
• EzDent- i: Refer to Section 9.5.2 when the EzDent-i is
installed.
9.5.1 When the EasyDent is installed
Running the Image Viewer
1. Run the image viewer. On your desktop, double-click the EasyDent icon or click
Start  All Programs  EasyDent. The EasyDent’s main window is displayed
as follows.