Vatech Smart Plus PHT-35LHS - Before Installing the System; Required Tools

3. Before Installing the System
22 Smart Plus (PHT-35LHS) Installation Manual
3. Before Installing the System
Before or during the system installation, make sure to use
checklist No.3 through No.6 in Appendix F. Installation
Checklist.
3.1 Required Tools
The following tools are necessary to install the Smart Plus.
Item Figure Size
Wrench Set
1.5 mm -10 mm
(0.06” - 0.4”)
T-shaped Hex
Wrench
6 mm - 10 mm
(0.24” - 0.4”)
Hex Wrench w/
Handle
6 mm - 10 mm
(0.24” - 0.4”)
Ratchet Wrench
Tips: 3 mm - 8 mm
(0.12” - 0.3”)
Needle-nose Pliers Regular
Monkey Wrench N/A
Cross Head
Screwdriver w/
Magnetic Tip
L = 200 mm (7.9”)
Spirit Level N/A