7. Setting up PC
Smart Plus (PHT-35LHS) Installation Manual 87
7.3 Installing the Internal Peripherals
Allow enough time to dissipate remnant energy after
unplugging the power cord from the main outlet or PC.
Disregard this section in case the PC system is supplied
with the equipment. (The peripherals have already been
installed inside the PC.)
Whenever managing the fiber optic frame grabber board:
1.
Wear the anti-static glove.
2.
DO NOT wear the likes of a thick jacket.
The following figures and descriptions are based on the PC
model Z4 from HP.
To Next Page
Loading...
