9. Installing Software
Smart Plus (PHT-35LHS) Installation Manual 97
9. Installing Software
Disregard this section in case the PC system is supplied with
the equipment. (The software has already been installed.)
9.1 Before Beginning
Ensure that the Emergency Stop Switch is in the OFF
position before starting with the InstallShield
installation.
DO NOT install programs on the PC where the image
viewer and image acquisition programs are installed.
Downloading irrelevant programs to the same PC may
cause conflicts between programs and result in
equipment failures.
The image viewer program such as EzDent-i /
EasyDent or the one from the 3rd party should be
installed in advance before the InstallShield installation.
For information on their installation procedures, refer to
the corresponding manuals.
Before InstallShield installation, ensure that the video
card driver installed on the PC is the most up-to-date
version. To check this, go to the Website:
www.nvidia.com.
Perform a virus scan for the PC and InstallShield
program with the anti-virus program before proceeding
with its installation.