Vatech Smart Plus PHT-35LHS - Image Optimization; Sensor Calibration

3. Before Installing the System
24 Smart Plus (PHT-35LHS) Installation Manual
3.2 Checking the ShockWatch and TiltWatch Indicators
This equipment is carefully inspected and packed before shipment. Nevertheless, the
recipient of this equipment should perform a visual inspection of all packages before
opening them to ensure that the equipment has not been damaged during shipping.
The installers and supervisors should check the status
indicators on each package before opening the package.
 The ShockWatch and TiltWatch indicators turn red if the
package had mechanical shock or impact during
transportation. However, the red indicator does not
exactly mean that the equipment has been damaged.
 These indicators are affixed only to the main box, which
contains the equipment since it is susceptible to external
impacts.
Check the followings before opening each package:
1. The ShockWatch and TiltWatch indicators are affixed only to the main box,
which contains the equipment since it is susceptible to external impacts.
2. Visually inspect the package for damage.
3. Locate the ShockWatch and TiltWatch indicators and check if they have been
activated.
DO NOT open the package if you find either ShockWatch
and TiltWatch indicators are activated. Please contact your
VATECH service representative for assistance.
Tilt Watch
Shock Watch