3. Before Installing the System
26 Smart Plus (PHT-35LHS) Installation Manual
Removing the Cover
1. Move the main box to a convenient place as close as possible to the installation
location.
2. Separate the top cover after removing the strapping bands.
3. Lift a small distance, remove the side covers.
4. Remove the plastic wrap covering the box by using a cutter.
While one installer is removing a side cover, another installer
should hold the other covers to prevent them from falling to
the ground.
5. Remove the component boxes and packing materials in the sequence as
shown in the figure.
To Next Page
Loading...
