VeriFone VX 680 Installation Guide

TERMINAL SETUP
Installing the Paper Roll
30 VX 680 INSTALLATION GUIDE
6 Drop the paper roll into the printer tray.
Figure 14 Loading Paper Roll
7 Pull paper up past the glue residue on the paper roll.
8 Close the paper roll cover by gently pressing directly on the cover until it clicks
shut, allowing a small amount of paper past the glue residue to extend outside
the printer door.
Figure 15 Closing Paper Roll Cover
9 Tear the paper off against the serrated plastic strip in the printer.
CAUTION
To prevent damaging the print roller, always gently press down on the paper roll
cover to close it.

VeriFone VX 680 Specifications

General

Display	3.5” QVGA (320 x 240 pixels) color LCD with backlight
Connectivity	Wi-Fi, Bluetooth, Ethernet
Processor	400 MHz ARM11 processor
Memory	128 MB Flash, 64 MB SDRAM
Operating System	Verix
Card Readers	MSR, EMV smart card reader, contactless/NFC
Printer	Integrated thermal printer
SAM Slots	3 SAM slots
Peripheral Ports	RS-232 port, USB port
Power Supply	AC adapter (100-240V), Battery backup
Weight	500g