Installing hardware into
racks
This chapter includes the following topics:
■ Precautions - heavy equipment
■ Installing the 3U16 storage shelf guide rails
■ Installing the 3U16 Storage Shelf into a rack
■ Installing the appliance guide rails
■ Installing the appliance into a rack
Precautions - heavy equipment
Warning: Inappropriate handling of NetBackup components can result in serious
injury, equipment damage, or both. Use appropriate practices, techniques, and
tools when handling these components.
The heaviest devices in any equipment rack should be installed in the bottom of
the rack. If heavy devices are installed at the top of the rack, the rack may tip over.
Injury to personnel and damage to equipment is very possible. The storage shelf
is heavier than the appliance. Therefore, you must install the storage shelf in the
bottom of the rack. Install the appliance higher in the rack than the storage shelves.
Refer to the following section for weights and dimensions of the hardware.
See “3U16 storage shelf weights and dimensions” on page 14.
3
Chapter
To Next Page
Loading...
Need help?
General
